Filter By:
- Bar Ends (12)
- BMX (43)
- Bottom Brackets (146)
- Brakes/Levers/Pads (335)
- Cables (153)
- Cassettes/Freewheels (60)
- Chainrings (261)
- Chains (62)
- Show More Categories
- Cranksets (209)
- Derailleurs (84)
- Forks (88)
- Groups (5)
- Handlebar Grips/Tape (218)
- Handlebars (154)
- Headsets (143)
- Pedals (191)
- Saddles (165)
- Seatposts (62)
- Shift/Brake Combinations (35)
- Shifters (93)
- Shocks (33)
- Stems (87)
- Other (780)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Parts

$0.99
Internally fitting service parts for Hayes hydraulic disc brake master cylinders.
- All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).

$0.99
Internally fitting service parts for Hayes hydraulic disc brake master cylinders.
- All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).

$1.00
Interlok spacers nest into the lip of Cane Creek headset uppers for a rock solid, flex-free fit.
- Composite construction

$1.08
Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.

$1.50
KMC 3/16" Master Link Chain Links
- For 3/16" chain, extra wide
- Extra-wide, for non-derailleur bikes: BMX, cruisers, etc
- Perfectly fits on KMC 415H & 415H-NP chains

$1.50 - $2.00
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension
- Uses standard chain pin connector and tool

$2.50
Use to create your desired chain length in single-speed applications. Only one half link is needed.
- Non-reusable
- Width: 9.4 mm
- Drivetrain Speeds: 1
- Color: Black
- Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC

$2.99
- For Race Face 30mm Cinch System cranks only
- Allows switching crank arms between bikes, such as a FatBike and an XC MTB
- Use RF-2999 for 8mm to 16mm hex wrench adapter to remove spindle

$3.41
Replacement M5 x 8 Flat Head Screw fastener for derailleur hangers.
- Thread: M5-0.8
- Overall Length: 8mm
- Material: Steel
- Use with 3mm hex wrench
- Bag of 5

$3.41
Replacement M3 x 10 Socket Head Screw fastener for derailleur hangers.
- Thread: M3-0.5
- Thread length: 10mm
- Use with 2.5mm hex wrench
- Bag of 5

$3.49 - $4.49
These double ended cables have a unique disc style head that fits Simplex/Huret and a normal Shimano/SRAM head.
- Galvanized
- Pre-stretched
- Double ended
- Cable Head: Shimano/SRAM, Huret/Simplex
- Defined Color: Silver
- Diameter: 1.2mm
- Double Ended: Yes
- Disc style Huret/Simplex end is slightly smaller than original spec, but is functionally compatible with Suntour X-Press shifters

$3.49
Basics brake cables provide value on a budget.
- Pre-stretched
- Double ended for compatibility with SRAM/Shimano road and mountain brakes
- Color: Silver
- Diameter: 1.6mm
$3.69
- Low profile
- Hardened and Plated reinforced steel backbone
- Patented Angled tip plow
- Water grooves
- Knurl-lock washer system

$3.75
KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs.
- Compatible with KMC K710 and K710SL chains
- No tools needed

$3.94 - $18.64
Aluminum headset stack spacers precision-cut to ensure proper headset function.
- Precision-cut for proper function
- Inner Diameter: 28.9mm
- Outer Diameter: 34.4mm
- Precision-machined aluminum

$3.95
The Tanpan ferrule converts standard Tanpans to Tanpan inlines.
- Coverts Tanpan into Tanpan Inline

$3.99
Odyssey's custom-designed Par Ends come standard with all of their grips. Its special plastic composite will not shatter like cheap bar ends do, and they’re very lightweight. The Par End is a combination of the over-the-bar-style cap and the inside-the-bar-style to prevent the inner portion from blowing out like it does on ordinary press-fit bar ends. Comes stock on all of Odyssey's grips.

$3.99 - $20.00
Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right.
- Made from Aluminum, anodized or polished finish, without logos
- 1-1/8" Diameter
- S.H.I.S. Stem Clamp Diameter: 28.6mm
Page 1 of 114
Next page