Transition Scout Alloy NX

$3,899.00
Availability: In stock (1)

We want to make it as easy as possible to experience great rear suspension performance. The GiddyUp suspension system is designed to behave intuitively across a broad range of setup. Because, we get it, sometimes you just want to grab your bike and GiddyUp, without checking your setup. When you do, it will always feel good.

We did this by balancing a 25% progressive leverage curve with a consistent linear rate of change. Anti-squat is tuned to enhance pedaling performance and acceleration. Overall chain growth is moderate and reduces after sag so chain tension doesn't get in the way of the suspension working.

This translates to killer small bump compliance and great mid-stroke support that gradually transitions into an end of stroke ramp that is subtle, yet supportive. The amount of consistent progression is carefully optimized for both air and coil shocks. Riders are able to add or remove volume spacers in air shocks to suite their individual riding style and there is no compromise to bottom out support with coil shocks. The Scout has 140mm of rear wheel travel when used with the supplied 205mm x 57.5mm stroke shock. It is also possible to install a longer, 205mm x 62.5mm stroke shock, to increase the rear wheel travel to 150mm.

A wide usable sag range of 25 - 35% allows the rider to tune the feel of the bike; from poppy and playful, to planted for plowing. Wherever you end up, you can focus on the trail without remotes, levers or knobs. Just grab your bike and GiddyUp.

 

Frame Specifications

REAR TRAVEL: 140mm (Compatible with 150mm)
FRONT TRAVEL: 150mm
WHEEL SIZE: 27.5"
SIZES: Carbon: XS, SM, MD, LG, XL
Alloy: XS, SM, MD, LG
COLORS: Carbon: Midnight Blue, Olive Green
Alloy: Classy Black, Raspberry Red
FRAME BEARINGS: 2x 6903, 2x 6902, 4x 6802, 2x 3802, 2x 6900
FORK AXLE TO CROWN: 545mm
FORK OFFSET: 37mm
REAR SHOCK SIZE: 205mm x 57.5mm (Compatible with a 205mm x 62.5mm shock)
SHOCK HARDWARE: Trunnion Mount Top / 25mm x 8mm Bottom
HEADSET (TOP): 44mm Zero Stack
HEADSET (BOTTOM): 56mm Zero Stack
BB SHELL: 73mm BSA Threaded
CHAINLINE: 52mm
REAR BRAKE MOUNT: 180mm Post Mount
REAR AXLE: Carbon: Syntace X12 148, with a 1.0mm thread pitch
Alloy: Transition Axle For UDH, 12mm x 148mm Spacing
ISCG TABS: ISCG05
SEATPOST DIAMETER: 31.6mm
SEAT CLAMP: Carbon: 37.0mm
Alloy: 34.9mm
MAX SEATPOST
INSERTION:    
Carbon: XS 210mm | Small 220mm | Medium 250mm | Large 290mm | XL 320mm
Alloy: XS 230mm | Small 240mm | Medium 270mm | Large 310mm
MAX CHAINRING SIZE: 34T Single Ring
MAX TIRE SIZE: 27.5 x 2.6
REAR SHOCK SAG: 140mm/57.5mm: 15-19mm (26-33%)
150mm/62.5mm: 16-20mm (26-32%)
0 stars based on 0 reviews