Filter By:
- Cameras (1)
- Parts & Accessories (147)
- Cyclo-Computers (37)
- GPS (19)
- Heart-Rate Monitors (7)
- Phone Accessories (16)
- Power Meters (33)
- Sports Watches (10)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Electronics
$49.00
SRAM eTap batteries are literally a snap to remove and charge. Just flip the tool-free battery latch up and slide the battery up and out of the derailleur. Then snap the battery into the USB powered charger and connect the charger to any USB power source or A/C USB adaptor. A full charge takes just 45 minutes to complete.
- Finish: Black
- Compatibility: SRAM RED eTap
$59.00
SRAM eTap Battery is the power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs.
- Up to 1000 kilometers of riding per charge
- Weight: 24g
- Finish: Black
- Compatibility: SRAM RED eTap
$19.99
- Discreet way to install an Apple AirTag inside your tubeless tire
- Identify the location of a stolen bike, enabling the owner to alert local authorities for retrieval
- AirTag is housed in a 3-part silicone and rubber tubeless valve mount
- Sacrificial stem, ensures tracker and rim protection under impact
- Silicone top cover protects tracker and internal plug reduces sealant ingress
- Supplied with 3 pairs of our rubber valve bases to suit different rim profiles for the optimum seal
- Note the Tubeless Secure Tag Holder can only be used in rear wheels – not for use on the front wheel Compatible tire types:
- MTB tyres (XC, Enduro Trail, Downhill)
- Gravel Tires (the narrowest recommended tyre size is 38mm wide)
$44.99
- Discreet way to install an Apple AirTag inside your tubeless tire
- Identify the location of a stolen bike, enabling the owner to alert local authorities for retrieval
- AirTag is housed in a 3-part silicone and rubber tubeless valve mount
- Sacrificial stem, ensures tracker and rim protection under impact
- Silicone top cover protects tracker and internal plug reduces sealant ingress
- Supplied with 3 pairs of our rubber valve bases to suit different rim profiles for the optimum seal
Note the Tubeless Secure Tag Holder can only be used in rear wheels – not for use on the front wheel Compatible tire types:
- MTB tyres (XC, Enduro Trail, Downhill)
- Gravel Tires (the narrowest recommended tyre size is 38mm wide)
$26.99
NEW K-EDGE Go Pro Style Top Cap is an ideal position for your camera or light. This mount replaces your top cap with a functional camera/light mount. Not all of these Top Cap mounts are created equal. The precision fit of the K-EDGE Mount is critical to both proper headset compression AND camera security. Whether dropping into a World Cup Downhill descent or simply following your kids on a family ride, enjoy the convenience of this GoPro style mount.
- Clean, sleek, (replaces top cap)
- Ideal position, centered, above cockpit
- Ultimate Enduro, DH, filming platform
- Adaptable camera or light mount
- CNC Machined, one piece, lifetime warranty
- All hardware included
$28.99 - $29.99
The K-EDGE Gravity Top Cap is a great computer mount for those mountain riders that already have a lot going on with the cockpit of their bikes, or just want a simple and sleek looking computer mount. The Top Cap replaces your already existing top cap with the K-EDGE Gravity top cap. Ideal position for Downhill and Enduro racing/riding, but is also a popular solution for any bike when using a smaller style computer (20, 25, 200, 500, 510, 520, 820).
- CNC Machined 6061-T6 Aluminum Platform, Injection Molded Garmin Specific Co- Polymer Interface
- Compatibility: All Garmin Edge Computers including the 1030*, 1000*, 820, 810*, 800*, 510, 520, 500, 200, 25, 20. Also supports the Touring, Touring Plus, Forerunner 310XT, and 910XT. (Larger EDGE computers such as 800, 810, 1000, 1030 may interfere with very steep, upright, stem angles.)
- Made in Boise, Idaho, USA.
- Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded
$349.99
Introduce the rider you are today to the one you’ll be tomorrow. The Edge® 540 cycling computer offers targeted adaptive coaching when used with your compatible power meter and heart rate monitor. It helps you manage your efforts by providing power targets throughout a course plus stamina insights, so you know how much gas is left in the tank. Get superior positional accuracy under dense tree cover or the urban canyon, thanks to multi-band GNSS technology. It features button controls that work in any conditions. Whether you’re riding roads, trails, gravel or indoor, you can benefit from insights and workouts that will help you understand your strengths and weaknesses and prepare for upcoming races or personal milestones.
$449.99
Introduce the rider you are today to the one you’ll be tomorrow. The Edge® 840 touchscreen cycling computer offers targeted adaptive coaching when used with your compatible power meter and heart rate monitor. It helps you manage your efforts by providing power targets throughout a course plus stamina insights, so you know how much gas is left in the tank. Get superior accuracy under dense tree cover or the urban canyon, thanks to multi-band GNSS technology. It features button controls that work in any environment matched with a responsive touchscreen so you can tap, pan and swipe on the fly. Whether you’re riding roads, trails, gravel or indoor, you can benefit from insights and workouts that will help you understand your strengths and weaknesses and prepare for upcoming races or personal milestones.
$9.99
Mount your Garmin Edge computer with the Quarter Turn Bike Mount. It includes the bike mount, rubber disc, and elastic bands to secure the Quarter Turn to your stem or handlebars.
$36.99
Instant bike dashboard
Enhance your riding experience while delta keeps your mobile phone safe. Whether cycling is a new hobby or you're an avid competitor, riding a mountain bike or a classic two-wheeler, this phone holder will provide full-screen visibility and hands-free access to ensure maximum safety for you AND your smartphone, while on the road!
Features
Mobile Phone Compatibility
- Bicycle mobile phone mount compatible with phones up to 2.9 inch wide, .625 inch depth, 6 inch length (up to iPhone X and Samsung Galaxy 9 non plus + versions).
Secure Mobile Phone Mounting
- Weatherproof bungee and rubber inserts keep phone secure while delta’s patented cam lock provides added security for your mobile phone on rough terrain.
Easily Accessible
- Sliding system allows for easy in/out while on the go, stop for an important call, adjust navigation, and never worry about missing the perfect photo opportunity while riding.
Multiple Mounting Options
- Included handlebar and stem cap mounts allow you to position your mobile phone in your desired location. Securely mounts to handlebar diameters up to 1 3/8" / 35 mm.
Quality Construction
- Designed for road cycling, your mobile phone is fully enclosed and securely mounted in place with a built-in locking mechanism. Precision-engineered design grips your device, providing ease-of-mind on the roughest terrain.
Weight
- 0.14 lbs / 65 grams
$36.99
Instant bike dashboard
Perfect for any enthusiast, Delta's bicycle phone mount allows you to securely display your mobile device while riding. Using a built-in lock mechanism, your plus-sized smartphone is secured safely with multiple grip points and bumpers, to prevent shock and reduce vibration on rough terrain. Adjust the angle of display for convenient viewing while riding to easily access navigation, answer that important call or stop for the perfect photo opportunity.
Features
Securely Displayed
- Weatherproof bungee and rubber inserts keep phone secure and protected while Delta's patented cam lock provides added security for your mobile phone on rough terrain.
Compatibility
- Bicycle mobile phone mount compatible with phones 3.5 inch wide x 0.5 inch depth x 7.8 inch length (up to iPhone 8+ Plus and Samsung Galaxy 9+ plus).
Easily Accessible
- Sliding system allows for easy in and out while on the go, so your phone is available for an important call, adjusting navigation, and you'll never have to miss the perfect photo opportunity.
Quality Construction
- Designed for road cycling, your mobile phone is fully enclosed and securely mounted in place with a built-in locking mechanism. Precision-engineered design grips your device, providing ease-of-mind on the roughest terrain.
Multiple Mounting Options
- Included handlebar and stem cap mounts allow you to position your mobile phone in your desired location. Securely mounts to handlebar diameters up to 1 3/8" / 35 mm
Weight
- 0.17 lbs / 80 grams
$23.00
Zipp delivers an uncomplicated computer mount for aerobar extensions that’s easy to install, lightweight, and vibration and slip free. The 22.3mm industry standard mount installs simply and securely on aero extensions. The Zipp QuickView TT Computer Mount is aerodynamically shaped for left-side installation, but also can be installed on the right bar extension. It comes with a single Torx T25 bolt, flexible mounting clamp, and a quarter-twist mount.
$75.00
**Only compatible with SL Sprint Stem (4 bolt)**
Zipp’s QuickView Integrated stem faceplate computer mount provides an efficient fix for an emerging challenge on modern bikes, system integration. This new mount doubles as the stem faceplate for a clean look that securely holds your cycle computer and a light or camera. No more multiple mounts bolted on here and there. The mount sits in front of your Zipp stem, positioning it for easy viewing and access. The Zipp QuickView Integrated mount will have two variants, one compatible with Service Course, Service Course SL, and SL Speed models, and another designed for use with the SL Sprint. This is an easy way to add elegant integration to your road bike.
FEATURES
-Computer compatibility: Garmin™, Wahoo™
-Accessory compatibility: GoPro™
-Lights: Niterider Lumina Series™ (with adapter), Light and Motion™, Bontrager™ (with adapter), Gloworm™ (with adapter), Lezyne™ (with adapter), Infini™ (with adapter), Sigma Sport™
-Lifetime warranty
$34.00
Handlebar computer mount for Garmin/Wahoo for Vuka Shift AXS
$18.95
• When aerobar space is tight, place your computer on top
• Tuck straw on either side for best aerodynamics
• Fits on TORPEDO SYSTEM 100, TORPEDO SYSTEM 400 & REFILL UPGRADE KIT BOTTLES (each sold separately)
• Compatible with most computers, including large screens (sold separately)
• Glass-reinforced nylon
• Weight: 18.5 grams
$98.95
Aerodynamic dual-bottle BTA hydration system that features a dynamic, multi-position computer mount to accommodate your changing needs. Raise the computer mount up to tuck in a refill bottle for race day, or lower it down for a standard bottle while maintaining the optimal view for training days.
- Telescoping Garmin mount features on-the-go tilt adjust to avoid glare.
- Zero-leak design with a sealed viewing window to easily monitor liquid levels, and a leak-free Dolphin Breather Valve that lets air in but doesn't let water out.
- Capacity: 26oz (768 mL)
- Material: Plate: 6061-T6 Aluminum
- Cage: Nylon Composite Vee Cage
- Computer Mount: Nylon Composite
- Bottle: Lead free, BPA-Free and HDPE food safe certified bottle
- Brackets: Nylon composite with Velcro straps coated with no-slip extension grip - Adjustment Width: 75-150mm
- Weight: 9.3oz (265g)
$35.95
Telescoping Garmin Computer Mount for Versa Plates. Raise the computer up for Refill Bottles, or lower it down to clear Standard Bottles. On-the-go tilt adjust to avoid glare.
- Telescoping computer mount makes for a seamless switch between Refill or Standard Bottle
- Compatible with Garmin bike computers and Multisport Watches
- Requires Versa Carbon Mount or Versa Aluminum Mount
Telescoping Garmin-Specific Computer Mount
- Raise the computer mount up to tuck in a Refill Bottle for race day, or seamlessly lower it down for a Standard Bottle to maintain the optimal view for training days. Compatible with Garmin bike computers and multisport watches.
On-the-Go Computer Tilt Adjust
- Avoid changing glare with a tilt mechanism for easy adjustments while you ride
Arrives Fully Assembled
- Few steps required to install and head out on your first ride
- Weight: 1.9oz (54g)
- Construction: Nylon Composite
Includes
- Fully assembled computer mount
- 2 screw sets: one for Versa Carbon Plates, and one for Versa Aluminum Plates
Warranty: Limited Lifetime
$24.95
Gain more room or find the perfect position for lights, computers, music players, GPS, or whatever, with the Topeak BarXtender. Attaches securely to the handlebars or stem and adjusts for optimum position.
- Clamp: Fits 22-38 mm tubes (shims included)
- Crossbar: Device mount bar 25.4 mm
- Material: Engineering Grade Plastic and Steel
- Mount: Handlebar, Handlebar Stem
- Size (L x W x H): 18 x 3 x 3 cm, 7.1” x 1.2” x 1.2” (folded)
- Size (L x W x H): 13 x 10 x 3 cm, 5.1” x 3.9” x 1.2” (open)
- Weight: 116 g / 4.08 oz
$59.95
The RideCase for iPhone has a scratch-resistant, dual-density, non-slip, high-grade engineering polymer/rubber exoskeleton for shock and impact protection that securely holds your phone while on the go. Its unique and full-angle adjustable mount allows viewing in landscape or portrait orientation and lets you mount or remove the RideCase in seconds. An integrated flip stand allows for easy viewing off your bike and is compatible with wireless charging.
- Material: Engineering grade polymer / Rubber / Machined aluminum
- Includes mounts for installation on handlebar, stem, or stem cap
$59.95 - $69.95
The RideCase for iPhone has a scratch-resistant, dual-density, non-slip, high-grade engineering polymer/rubber exoskeleton for shock and impact protection that securely holds your phone while on the go. Its unique and full-angle adjustable mount allows viewing in landscape or portrait orientation and lets you mount or remove the RideCase in seconds. An integrated flip stand allows for easy viewing off your bike and is compatible with wireless charging.
- Material: Engineering grade polymer / Rubber / Machined aluminum
- Includes mounts for installation on handlebar, stem, or stem cap
- Size: 15.7 x 8.2 x 1.5cm / 6.2" x 3.2" x 0.59"
- Weight: 35g / 1.23oz
- Added Features: Integrated flipstand for landscape or portrait viewing angle adjustable rotates for landscape or portrait viewing
$69.95
Works with iPhone SE(2nd Gen) / 8 / 7 The RideCase for iPhone has a scratch-resistant, dual density, non-slip, high-grade engineering polymer/rubber exoskeleton for shock and impact protection that securely holds your phone while on the go. Its unique and full-angle adjustable mount allows viewing in landscape or portrait orientation and lets you mount or remove the RideCase in seconds. An integrated flip stand allows for easy viewing off your bike and is compatible with wireless charging.
- Material: Engineering grade polymer / Rubber / Machined aluminum
- Mount: Included mounts for installation on handlebar, stem, or stem cap
- Size: 14.4 x 7.3 x 1.4cm / 5.7" x 2.9" x 0.55"
- Weight: 41.6g / 1.47oz
- Added Features: Integrated flipstand for landscape or portrait viewing
- Compatibility: Works with iPhone SE 2nd gen/8/7/6/6s
$119.99
This handlebar bracket has been developed so you can attach a tablet to your handlebars. The design provides a safe distance so that no sweat falls on the screen while you are training.
- Suitable for handlebars with a diameter ranging from 26mm to 35mm
- Adjustable to different tablet sizes: length 182-267mm, width 112-197mm, max. thickness 13mm
$39.99
• Fits head & derailleur tubes to mount accessories on a USS (under-seat steering) recumbent
$52.49
- Clear, water resistant phone pocket
- Window measures 3.25 x 5.25"
- Great for quick access while on bike
- Quick release stem mounting system
- Fits most stems
- Bag volume: 90 c.i.
- Size: 7.1x3.3x2.8"
$19.99
Enjoy easy viewing with the Butler Out Front handlebar mount!
Out Front Mount for following models:
BC 1909 STS
BC 2209 STS
ROX 5.0
ROX 6.0
ROX 8
ROX 8.1
ROX 9
ROX 9.1
*Note: not for use with ROX 10.0
$29.99
Use this Sigma docking station to easily download ride data to your computer. The docking station is compatible with Sigma's Rox models 8.0, 9.0, 8.1, and 9.1.
$135.99
Shimano Di2 External Battery Mounts
- All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions
- Use Di2 system checker to update component firmware
$166.99
- Di2 internal battery, fits all e-Tube Di2 groups
- Capacity: 500 mAH (± 2000km)
- Use with EW-WU101 or SC-MT800 interfaces/junction to gain BlueTooth Smart wireless connectivity for on-the-fly adjustments with smartphones and tablets
- Requires SM-BCR2 charger
$184.99
The new DN300 Built-In type battery features the same waterproof design that Di2 users have loved for generations. Now with 3 ports, it delivers stable power to Shimano's 12-speed road derailleurs (and shifters if a fully wired option is selected).
- Compatible with thinner next-generation electric wire SD300 and systems after R9250/R8150 series
- Li-Ion type
- Capacity: 500 mAH |3.7Wh (± 2000km autonomy)
- Rated voltage: 7.4V
- Charges through RD-R9250 |RD-R8150 rear derailleur using EW-EC300 Di2 Charging Cable (sold separately)
- Fixing small parts included
- Weight: 52g
$79.99
Shimano BT-R1A External Di2 Battery
- All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions
- Use Di2 system checker to update component firmware
- Di2 External Battery, battery charger, and power cable are universal between Dura-Ace 9070, 7970, Ultegra 6870, 6770 and Alfine Di2 systems
- Battery weight: 71 grams
Page 1 of 9
Next page