Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Bikes

$4,999.00 - $10,999.00 $8,199.00 - $10,999.00 Up to 39% Off
Plug Into The Vibe Up, down, all around. The Repeater loves it all. Buckle up and get ready to charge, the Repeater is down for anything. With 160mm travel, 29 inch wheels, the Shimano EP8 motor system, and a 630w battery, you can maximize fun on the ups and the downs. Whether it's a quick rip after work, ditching the shuttle truck, or just the pure joy of exploring that you are after, the Repeater loves it all. Like all of our other beloved bikes, the Repeater has SBG geometry and our GiddyUp suspension, so you'll feel right at home the moment you turn on the power. AVAILABLE COLORS: Mossy Green Speed Balanced Geometry SBG ensures the bike maintains low speed agility, front wheel traction, and proper rider weight balance while actually increasing confidence in steep terrain and at high speeds. With SBG, a slacker head tube angle is combined with a all new reduced offset fork standard, preventing the front wheel from being too far in front of the rider. This improves front to rear weight distribution on the bike, which is often out of balance on long and slack bikes. One of SBG's greatest benefits is that it creates a confident steering feel that adapts to wheel speed. More stability when going fast, more agility on technical slow speed maneuvering as well as improved traction, control and confidence for any skill level of rider. GIDDYUP SUSPENSION DESIGN We want to make it as easy as possible to experience great rear suspension performance. The GiddyUp suspension system is designed to behave intuitively across a broad range of setup. Because, we get it, sometimes you just want to grab your bike and GiddyUp, without checking your setup. When you do, it will always feel good. The GiddyUp suspension layout provides 160mm of travel from a 205 x 65mm shock, and is tuned to work correctly with both air and coil. Riders are able to add or remove volume spacers in the rear air shock to suit their individual riding style and there is plenty of bottom out control with air or coil shocks when things get rowdy. Compared to our other GiddyUp bikes, the Repeater has a slightly lower leverage ratio to offset the added weight of the motor and battery, this allows you to run normal air pressures in the rear shock. With nearly 26% progression and an E-bike specific version of our GiddyUp suspension kinematic, the Repeater has an excellent balance of support and small bump sensitivity. The Repeater suspension is tuned for maximum traction that enhances both descending and climbing experiences, while delivering a bottomless ride feel. A suggested sag range of 28 - 34% allows the rider to tune the feel of the bike; from a firm and snappy jump and slash mode, to a more supple and active full on party mode. Wherever you end up, you can focus on the trail without remotes, levers or knobs. Just grab your bike and GiddyUp. POWERED BY YOU, ASSISTED BY SHIMANO The Repeater comes equipped with a Shimano EP8 system that delivers 85Nm of torque, 250W continuous power and 500W peak power. All build levels come with Shimano's top of the line full color display, making it easy to tell which mode you are in with a quick glance. The Shimano 630Wh battery is easily removable with a 4mm allen wrench so you can easily swap to a spare for increased range, or get more laps while your other battery is charging. The full Shimano system means there are no custom wires, plugs or proprietary chargers, so you can find replacement parts anywhere and even borrow a charger from a friend. The EP8 motor comes pre-tuned by Transition with two profiles to maximize battery life and give you the best ride experience possible. Profile 1 is focused on giving you a powerful but natural ride feel in TRAIL mode, leaving BOOST for when you really need it, and making ECO more usable on the trail. Profile 2 is focused on range, helping you go as far as possible when distance is what you're after. Riders can easily modify the characteristics of ECO, TRAIL, and BOOST modes in both profiles via the Shimano E-Tube app. The Shimano EP8 system was designed specifically for off road use, offering seamless integration, plenty of power, and options to customize the feel of the motor based on your preferences.
$10,499.00
The Hard Hitting Powerhouse Tackle all the technical terrain you can handle. The Repeater Powertrain takes your eMTB experience to a whole new level. This system harmoniously integrates the most complicated moving parts on an eMTB to create a simple, worry-free, and exhilarating ride. With 170mm travel front and rear, user tuneable motor and shifting modes, and wheel size options, the Repeater PT is a groundbreaking eMTB designed to fulfill all of your powered riding dreams. Utilizing the 90nm Eagle Powertrain Motor by Brose, SRAM 720wh battery, SRAM T-Type AXS Transmission, and the SRAM Powertrain brain, the Repeater PT marks a giant leap in the integration of motor and drivetrain, allowing you to give your full attention to enjoying the ride while auto shift handles the rest.
$1,199.00 - $1,499.00 $1,499.00 Up to 20% Off
Fully equipped for exceptional performance and maximum range, the NCM C7 e-city bike, equipped with a torque sensor, transforms your cycling experience into something more convenient and more captivating, offering more distance, more power, and more versatility. BIKE COMPONENTS Frame: Alu. 6061, M: 20.5 inches, L: 22.8 inches Suspension Fork: ZF, 5058-01 Brake: Hydraulic disc brake Freewheel: LY, 8 Speed, 11-32T Tire: CST, C-1953 Saddle: Selle Royal, A236URN Stem: HP-HD75-8 Crank: Das-Kit, 42T Shifter: LT-8 Speed Derailleur: LT-8 Speed Chain: KMC, Z51 ELECTRIC COMPONENTS Battery: Das-Kit, i6-3614, 504WH Hub Motor Rated / Peak Power: Das-Kit, X2, 36V 350W / 600W Controller: Das-Kit, T6, 36V15A Charger: Das-Kit, 36V3A Display: Das-Kit E2 Front Light: DH002E, 40 Lux Rear Light: DR004B WEIGHT Net Weight (with battery): 49.0 lbs Battery Weight: 6.0 lbs Max Load (driver+bike): 275.0 lbs
$3,099.00
The Kahuna is one of our best-selling hardtails. People love its simplicity and practicality. We brought that ethos to the El Kahuna and built a bike that was multipurpose—capable of riding the local singletrack for hours on end, and still have enough battery to go get the groceries on the way home. Its Shimano pedal-assist motor is powered by a semi-integrated battery and its 100mm fork provides just the right amount of suspension to absorb smaller hits on the trail. 29" wheels with 2.25" tires make this bike comfortable across all kinds of terrain. The El Kahuna the perfect all-rounder. KONA 6061 ALUMINUM Kona 7005 and 6061 Aluminum alloys are used extensively throughout our fleet of mountain and asphalt bicycles. A tough, durable, light alloy, both Kona 7005 and 6061 deliver fantastic, reliable performance that lasts for thousands of rides. Much of our 7005/6061 tubing is butted and/or formed, meaning the tubing's wall thickness can be increased or decreased, as well as shaped, so we can fine-tune a particular frame's strength and ride characteristics depending on its intended application. INTERNAL HEADSET Bearing cups are actually pressed into the frame and are easily removable. An internal headset also reduces stack height, so the height of the stem and bars are more adjustable, giving the rider the best fit possible. TAPERED HEAD TUBE More girth at the bottom of the head tube better distributes shock force, prolonging the bearing life of the headset itself and eliminating brake shudder, while providing confident steering performance. The inherent strength of its triangular design also means a stronger steering position and improved balance, giving the rider more control in rough terrain. A zero-stack, tapered head tube also puts strength where the load is going—into the lower headset cup—maximizing bearing durability where it's needed. TUBELESS COMPATIBLE RIMS Tubeless rims allow for tires with more puncture resistance; the ability to run lower tire pressure, which provides better tire grip on the trail; lower rolling resistance; and weight savings over traditional tube and tire systems.
$3,299.00 $4,373.00 25% Off
Engineered in Canada, the Flex Overland is a sturdy off-roading and cargo fat tire electric bike with foldable aluminum unisex and unisize step-thru design and dual battery option. The proprietary rear hub delivers the up to 500W power, allowing you to climb the sharpest of hills and carry your cargo effortlessly. Flex Overland is designed for 1000W and up to 35 Km/hr. speed, the current release is set to 500W rated and 32 Km/hr. speed to keep it street-legal. Black frame with orange long rack 500W Rated Power 32Km/h / 20mph Max Speed 200Km / 125 miles Dual Range 180Kg / 400lbs Payload Capacity 32Kg / 70.5lbs Total Weight
$2,099.00 - $2,122.00
32 Km/h Max Speed 20 mph 100-200Km / 62-125miles Max Range With Single or Dual Battery 400 lb Rated for 180Kg payload capacity Foldable Step Thru Frame The Only Folding Cargo Bike in Market Lightest & Most Compact eTrike in Cargo eBike Category Lowest Q-factor of Any Fat Trike in Market Using ENVO Flex You Can Indulge in Adventures Throughout The Year on Trails and Snow The proprietary front hub delivers a maximum of 500W of street-legal power and a range of up to 200Km / 125miles with a dual battery option. ENVO Flex allows you the FLEXibility to upgrade and change your eBike as your requirements change over time. The Flex Overland can be easily converted into the Flex SnowBike with the help of modular design components, allowing you the utility of two products on one platform. ESE – ENVO Sustainable Engineering Full cargo capacity, with front and rear racks and in conjunction with add-ons. Torque emulating smooth PAS, providing incomparable riding experience. 20" fat urban tires – Perfect for low noise and low drag yet provides adequate grip and load capacity Standard bike add-ons compatible such as surfboard holder, golf bag holder, etc. 36V12.8Ah Battery Pack - Additional 36V12.8Ah dual battery option available FRAME The Flex is built with a solid, lightweight, foldable and unisex hydro-formed aluminum alloy frame suitable for people from 4’11’’ all the way to 6’5” rider. It is capable of supporting up to 400lbs of payload and offers a step thru design, which makes it easy for the rider to get on and off. The frame is specially designed to minimize all the vibrations and noise from the drive- system, the right wheelbase for a high speed and a pleasurable ride on both paved and unpaved roads. BATTERY PACK The ENVO Battery powering the Flex Urban is super lightweight, down tube mounting Li-Ion pack in a stylish thin ABS case with an auto-connect socket, a charge indicator, security lock. The battery is removable and can reach a range of up to 100Km / 62mph per charge on pedal assist level 1. The battery can be charged on or off the bike frame using the little portable CC-CV smart Li-Ion battery charger. The ENVO Battery is an A-grade branded Li-Ion battery, comprising of LG or Panasonic Li-Ion cells and a BMS that avoids battery from overcharging, overloading, and other hazardous activities, thereby increasing both cyclic and calendar life of the battery. Battery cells have been selected for best operating in freezing temperatures. Flex comes with a dual battery option, allowing you to go twice as far in your travels. Dual batteries on Flex Urban gives you 920Wh of battery capacity, allowing you to travel up to 200km / 125miles on a single charge. E-ASSIST SYSTEM The ENVO Flex is equipped with an advanced pedal-assist sensor with an optimized torque emulation software. The advanced torque emulating Pedal Assist Sensor (PAS) signals the controller to run the motor between 5 levels of pedal assist, providing a boost to your pedaling depending on the level of assistance you select while riding. The ENVO Flex is equipped with an on-demand thumb throttle that gives you an extra boost which activates the motor proportionally to the twist, does not matter if you are pedaling, to give you a fully electric ride in case you cannot pedal or need an instant acceleration or uphill push. GEARED MOTOR HUB ENVO FLEX Urban is equipped with a sealed, powerful, upkeep free, geared hub motor that offers 500W power and 60Nm torque. Our motors are designed efficiently and hence are lighter than most powered geared hub motors in Canada, yet they deliver high torque and efficiency. These ENVO motors are developed for over 20,000 Km (12,500 miles) of maintenance-free ride. ADJUSTABLE STEM The FLEX Urban comes with an adjustable telescopic handlebar, this lets the rider do the ergonomic fine tuning allowing them to choose efficient pedaling position. ELECTRIC BIKE TIRES Flex Urban comes with 20inch urban style fat tires. These fat tires are cushion enough to improve ride comfort, dynamic maneuverability, and handling in different terrains. Tires are fat and knobby enough for the best grip on wet cement, asphalt paved, dirt or gravel trails which creates minimum noise and drag for normal urban paved rides. ELECTRIC BIKE DISK BRAKE Top of the line mechanical disk brakes equipped with electric cut-off sensors provide more safety to the bike as well as the rider. TRANSMISSION SYSTEM Well-engineered 52T chain ring and 8 speed 11-32 teeth cassette transmission help you overcome up to 25% grade when climbing a hill on gear 1 or 40km/h (25mph) speed on gear 8 with gentle peddling. REAR RACK ENVO Flex comes with a specially designed sturdy rear rack with rating of 150 lbs weight and capable of fitting two child seats (longer version). The rear rack comes with a cushion (Just on short racks) allowing a second adult to ride on the ebike. HEADLIGHT The FLEX Ur
$4,799.00
Skid Loader is a compact electric cargo bike wired for large loads, small footprints, and everyday deviant behavior. Just as Easy, Not as Big Cutting back on car trips is a worthy undertaking, especially in these times of planetary peril. With its electric-assist motor and extreme hauling capabilities, our compact electric cargo bike Skid Loader invites those inclined to throw a leg over and wave their middle digits at downtown gridlock. Built for finding more ways to drive less and ferrying various materials to work, play, or wherever, we gave Skid Loader the utility of a long-tail and a manageable footprint that fits wherever a normal bike does. Comfortable and compliant under load, Skid Loader also enjoys cutting loose without cargo. Engineered to ride and feel like a regular bike, its 27.5" wheel platform provides abundant tire options you don't get from cargo bikes rolling on smaller wheels. And because it's a Surly, we gave it ample tire clearance and built it for commutes that go from bus stop to bandit trail. We also gave all three frame sizes adequate standover and a dropper post to fit riders of assorted shapes and sizes. Furnished with useful accessory barnacles and internal routing for just about everything, Skid Loader's scaled-down and feature-packed cargo frame removes the roadblocks between you and riding whenever the hell you want. - Equipped with Bosch Performance Cargo Drive Unit, featuring four invigorating levels of ride assist - Capable of running dual batteries for extended range (all mounting hardware and wiring included) - Dedicated rear rack rated for 100 pounds of potatoes, thanks to beefed-up M6 hardware - Internal cable routing for dropper post, brake, shifter, and lights - Mounts for fenders, front rack, and bottle cages (two on Medium and Large, one on Small) - Stable dual-leg kickstand for your loading convenience - Compatible with Surly Excellent Adventure rear axle for use with Surly Bill and Ted Trailers; accommodations for human cargo - Sturdy, full-size wheels and large-volume 27.5 x 2.5" ExtraTerrestrial tires
$2,999.00
We designed the Confluence Apex 1 to be the best gravel e-bike for squeezing more adventure into each day. With a lightweight MAHLE hub-drive system putting out 40Nm of torque, it’s just the boost you need to head out for that lunch ride you deserve or that extra spin when your legs are feeling weary. Confluence’s aluminum frame and carbon fork are designed around a geometry that puts you in a comfortable and stable position — especially important for putting in more miles at higher average speeds. Our on-bike cargo features let you bring all you need for those extra miles, and the e-assist lets you overpack without worrying about the weight penalty. Rounding it all out is SRAM’s Apex 1 drivetrain, delivering plenty of reliable gear range for wherever you point it. Charge Your Adventure with Confluence Apex 1. Features: - 6061-T6 alloy frame Confluence’s aluminum alloy tubing is developed specifically for the Confluence frame and is heat-treated to T6 alloy standards for extra strength and durability. - Carbon fiber fork The Confluence Carbon fork is lightweight, comfortable, cargo-ready, and gives you loads of tire clearance to play with. - MAHLE X35+ Class 1 hub-drive system This Class 1 rear hub-drive motor delivers electric assist up to 20mph/32kph. It’s one of the lightest e-bike systems on the market, and its low-profile appearance means that Confluence looks like a regular gravel bike. - 40Nm max torque Up to 40Nm of assist that feels natural, not overwhelming. The MAHLE X35+ system offers three assist levels, and sensors detect when you’re pedaling to moderate the level of support generated at the hub. - 250Wh internal battery You can’t see it, but you’ll certainly feel it. MAHLE’s 250Wh battery is nestled inside Confluence’s downtube. This battery size hits the ideal combination of efficiency and weight for what we designed Confluence to do. - Capable of up to 458Wh with MAHLE Range Extender battery? (sold separately) Easily increase your range for bigger adventures with a Range Extender battery available from MAHLE. - iWOC One compact remote top tube controller Minimal and intuitive controller displays battery status and allows you to cycle through assist modes with one button. - Connected if you want to be The MAHLE system offers Ant+ connectivity for third-party devices and Bluetooth® for app integration. MAHLE’s MySmartBike app allows for customization, metrics, mapping, and more. - Massive 700c x 50mm tire clearance Confluence fits up to 700c x 50mm tires, so you can ride those lesser-traveled tracks. 700c x 42mm maximum tire clearance when equipped with fenders. - On-bike cargo features Attach front and rear racks to your Confluence for serious cargo capacity, or use the sleeker Three-Pack mounts for extra water bottles or our EXP Series Anything Cage HD to pack a cooking kit, extra layers, or whatever dream up.
$2,499.00
Confluence Flat Bar Altus opens up more ride opportunities with a MAHLE hub-drive electric assist good for 40Nm of torque. This e-gravel bike features comfortable, confident upright geometry and a flat handlebar for leverage and control. The aluminum frame and carbon fork strike a balance of durability and performance you’ll appreciate, with frame and fork cargo mounts to keep you fueled on those longer rides, or to load up with bikepacking gear. Shimano’s Altus 1x9 drivetrain is a proven workhorse that will get you through any ride without a fuss. Charge Your Adventure with Confluence Flat Bar Altus. Features: - 6061-T6 alloy frame Confluence’s aluminum alloy tubing is developed specifically for the Confluence frame and is heat-treated to T6 alloy standards for extra strength and durability. - Carbon fiber fork The Confluence Carbon fork is lightweight, comfortable, cargo-ready, and gives you loads of tire clearance to play with. - MAHLE X35+ Class 1 hub-drive system This Class 1 rear hub-drive motor delivers electric assist up to 20mph/32kph. It’s one of the lightest e-bike systems on the market, and its low-profile appearance means that Confluence looks like a regular gravel bike. - 40Nm max torque Up to 40Nm of assist that feels natural, not overwhelming. The MAHLE X35+ system offers three assist levels, and sensors detect when you’re pedaling to moderate the level of support generated at the hub. - 250Wh internal battery You can’t see it, but you’ll certainly feel it. MAHLE’s 250Wh battery is nestled inside Confluence’s downtube. This battery size hits the ideal combination of efficiency and weight for what we designed Confluence to do. - Capable of up to 458Wh with MAHLE Range Extender battery? (sold separately) Easily increase your range for bigger adventures with a Range Extender battery available from MAHLE. - iWOC One compact remote top tube controller Minimal and intuitive controller displays battery status and allows you to cycle through assist modes with one button. - Connected if you want to be The MAHLE system offers Ant+ connectivity for third-party devices and Bluetooth® for app integration. MAHLE’s MySmartBike app allows for customization, metrics, mapping, and more. - Massive 700c x 50mm tire clearance Confluence fits up to 700c x 50mm tires, so you can ride those lesser-traveled tracks. 700c x 42mm maximum tire clearance when equipped with fenders. - On-bike cargo features Attach front and rear racks to your Confluence for serious cargo capacity, or use the sleeker Three-Pack mounts for extra water bottles or our EXP Series Anything Cage HD to pack a cooking kit, extra layers, or whatever dream up.
$2,999.00
“Can I squeeze a ride in?” “Do I have the legs to see where this side road goes?” “A ride would feel great, but do I have the energy?” Confluence Flat Bar CUES 11 answers these questions with an “Oh yeah.” Its MAHLE hub-drive system delivers 40Nm of electric assist to give you the extra push you need to ride more. Confluence’s geometry is designed specifically for the extra comfort and confidence you want for riding gravel e-bikes at higher average speeds on sketchy roads. The aluminum frame and carbon fork balance weight, comfort, and performance. Cargo and fender mounts let you configure your Confluence your way. The Shimano CUES 11-speed drivetrain tops it all off with smooth shifting and a massive gear range. Charge Your Adventure with Confluence Flat Bar CUES 11. Features: - 6061-T6 alloy frame Confluence’s aluminum alloy tubing is developed specifically for the Confluence frame and is heat-treated to T6 alloy standards for extra strength and durability. - Carbon fiber fork The Confluence Carbon fork is lightweight, comfortable, cargo-ready, and gives you loads of tire clearance to play with. - MAHLE X35+ Class 1 hub-drive system This Class 1 rear hub-drive motor delivers electric assist up to 20mph/32kph. It’s one of the lightest ebike systems on the market, and its low-profile appearance means that Confluence looks like a regular gravel bike. - 40Nm max torque Up to 40Nm of assist that feels natural, not overwhelming. The MAHLE X35+ system offers three assist levels, and sensors detect when you’re pedaling to moderate the level of support generated at the hub. - 250Wh internal battery You can’t see it, but you’ll certainly feel it. MAHLE’s 250Wh battery is nestled inside Confluence’s downtube. This battery size hits the ideal combination of efficiency and weight for what we designed Confluence to do. - Capable of up to 458Wh with MAHLE Range Extender battery? (sold separately) Easily increase your range for bigger adventures with a Range Extender battery available from MAHLE. - iWOC One compact remote top tube controller Minimal and intuitive controller displays battery status and allows you to cycle through assist modes with one button. - Connected if you want to be The MAHLE system offers Ant+ connectivity for third-party devices and Bluetooth® for app integration. MAHLE’s MySmartBike app allows for customization, metrics, mapping, and more. - Massive 700c x 50mm tire clearance Confluence fits up to 700c x 50mm tires, so you can ride those lesser-traveled tracks. 700c x 42mm maximum tire clearance when equipped with fenders. - On-bike cargo features Attach front and rear racks to your Confluence for serious cargo capacity, or use the sleeker Three-Pack mounts for extra water bottles or our EXP Series Anything Cage HD to pack a cooking kit, extra layers, or whatever dream up.
$5,249.99
- Frame: 6061-T6 hydro-formed Aluminium, TA, rack/fender mounts, stealth dropper ready, Shimano EP8 mid-engine mount - Fork: Seido MGV full carbon, TA, 1.1/2'' - 1.1/8'', fender / triple cage mounts, 180 mm max rotor size, lowrider rack Compatible, internal hub dynamo cable routing - Levers: Shimano GRX ST-RX810 hydraulic - Shifter: Shimano GRX ST-RX810-LA 1 x 11, spare shifter for dropper actuation - Brakes: Shimano GRX BR-RX810 flat mount hydraulic disc brakes - Crankset: Shimano EP8 FC-EM900 hollow forged aluminium crank - Bottom Bracket: - - Cassette: Shimano Deore XT CS-M8000, 11-speed, 11 - 42 T - Rear derailleur: Shimano GRX RD-RX812, clutch - Hubs: Seido Tau sealed hub, 11-speed, steel axle, centerlock disc - Rims: Seido Magnon i25 heavy-duty asymmetric, tubeless ready, 32h - Tires: WTB Venture TCS Light / Fast Rolling S 650B x 47C / M - XL 700C x 50C, tubeless ready
$2,999.00
The Kahuna is one of our best-selling hardtails. People love its simplicity and practicality. We brought that ethos to the El Kahuna and built a bike that was multipurpose—capable of riding the local singletrack for hours on end and still have enough battery to go get the groceries on the way home. A Shimano E6100 pedal-assist motor is powered by a semi-integrated 504 Wh battery. A 100mm Suntour XCR 34 Air fork provides just the right amount of suspension to absorb smaller hits on the trail. Shimano Deore brakes provide reliable stopping power. WTB ST i27 TCS 2.0 29" rims are wrapped with super grippy WTB Trail Boss 2.25" tires making the El Kahuna the perfect all-arounder. Kona 6061 Aluminum Kona 7005 and 6061 Aluminum alloys are used extensively throughout our fleet of mountain and asphalt bicycles. Tough, durable, and light alloys, both Kona 7005 and 6061 deliver fantastic, reliable performance that lasts for thousands of rides. Much of our 7005/6061 tubing is butted and/or formed, meaning the tubing's wall thickness can be increased or decreased, as well as shaped, so we can fine-tune a particular frame's strength and ride characteristics depending on its intended application. Internal Headset Bearing cups are actually pressed into the frame and are easily removable. An internal headset also reduces stack height, so the height of the stem and bars are more adjustable, giving the rider the best fit possible. Tapered Head Tube More girth at the bottom of the head tube better distributes shock force, prolonging the bearing life of the headset itself and eliminating brake shudder, while providing confident steering performance. The inherent strength of its triangular design also means a stronger steering position and improved balance, giving the rider more control in rough terrain. A zero-stack, tapered head tube also puts strength where the load is going—into the lower headset cup—maximizing bearing durability where it's needed. Tubeless Compatible Rims Tubeless rims allow for tires with more puncture resistance; the ability to run lower tire pressure, which provides better tire grip on the trail; lower rolling resistance; and weight savings over traditional tube and tire systems.
Page 1 of 1