Pumps/Inflation

Topeak's SmartGauge D2 boasts a digital readout that goes up to 250 psi and it's compatible with Presta and Schrader valves, as well as shocks and suspension forks. The head rotates 180 degrees to get in tough spots, and an air release button helps you dial in the perfect pressure.

• Secures frame pump to frame • Nylon • Also good for use as a watch band

Keep your suspension pressure dialed-in with RockShox's High-Pressure Fork/Shock Pump. It features an aluminum barrel with an ergonomic handle, a handy finger-tap bleed adjust button for fine-tuning settings, and a large gauge. The hose swivels 360-degrees to fit anywhere.

There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.

Easy to use, powerful, durable and economical, Park Tool's PFP-8 Home Mechanic's Floor Pump has a place in every garage and home bike shop and is perfect to take along to cycling events, too! It inflates like a champ thanks to its sturdy steel barrel, tough handle, composite thumblock head that fits Presta and Schrader valves, sturdy steel base, long hose and extra-large, easy-to-read gauge.

The Muc-Off Inflator kits help riders quickly inflate their tires and quickly get back to riding in no time. Each kit contains 2x cartridges, 1x compact and durable CNC-machined inflator head with soft-touch press down button which easily controls CO2 release. Dual head nozzle compatible with Presta and Schrader valves and 1x neoprene sleeve to help avoid freeze burn. - Push design to easily control CO2 release - Stainless steel internal pin - Dual head nozzle, compatible with both Presta & Schrader valves - Compatible with most threaded 16g & 25g CO2 Cartridges - Two cartridges included

Lezyne's Macro Floor Drive Pump is an outstanding value. It features a durable steel barrel and piston, along with an ergonomic, sleek composite matrix handle and base. - Effortless Inflation design - Precision gauge - Extra-long hose - Ultra-rigid construction doesn’t flex during use - Max pressure: 220psi / 15.1 bar

Crank Brothers' Gem Floor Pump overs versatility and simplicity in an easy-to-use floor pump. What else do you need? - Foot activated high pressure / high volume switch - Wide stamped steel base for easy pumping - Corrosion resistant aluminum body - Presta /Schrader convertible head - Hidden needle adapter & plastic valve adapter - 160 psi / 11 bar - Bar / psi analog gauge

Crank Brothers' Gem Pump packs a powerful punch for its small size and low weight. It'll inflate your tires to 130psi quickly with its dual-piston design. Plus, its aluminum barrel and high-volume/high-pressure (off-road/road tires) settings make inflation easy. The Gem fits Schrader and Presta valves, too.

Klic Co2 head/cartridge adaptor replacement

The Klic Floor Pump effortlessly adapts to your needs with a magnetic quick-connect interface. The hidden hose with integrated gauge stores neatly away in the pump body when not in use, and can be used separately as a standalone tire pressure gauge. The optional burst tank installs or removes in seconds, and can be used either separately or integrated for installing and inflating tubeless tires with ease. - Burst tank can be pressurized to install and inflate tubeless tires - Tank is removable for easy transport - Hidden hose stores neatly in the body of the pump

You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.

- Solution for mounting pumps and C02 inflators on frames or seatpost - Soft rubber block and Velcro loops hold pumps tightly

The world’s first CO2 inflator with tire gauge provides tire-inflation and tire-pressure measurement. The angled head fits Presta and Schrader valves and a special feature allows the user to adjust the flow while filling the tire. Dual-end design allows for one-cartridge storage. - CO2 inflator that features a gauge as well - Flow is adjustable using special feature - Compatible with both Presta and Schrader valves - Presta/Schrader with integrated dust cap, Push to inflate - Gauge: Reads 160 psi / 11 bar, 1-1/2” analog - Engineering-grade polymer - Weight: 45g /1.59 oz - Size: 6.5 x 5.2 x 3.3 cm / 2.5” x 2” x 1.3” - Accepts threaded cartridges - CO2 cartridges sold separately

Topeak's Joe Blow Max HP quickly inflates tires with a durable steel barrel, a sturdy composite base, a padded handle, and a tight-sealing TwinHead that fits Presta, Schrader and even Dunlop valves. You'll also appreciate the extra-long hose and big, easy-to-read gauge.

Air up your mountain bike tires in a hurry with Topeak's Joe Blow Mountain floor pump. Its large diameter steel barrel, sturdy composite base and oversized padded handle make inflating high volume tires an easy task. For versatility, its double-sided TwinHead pump head tightly grips both Presta and Schrader valves. And, you'll appreciate the easy-to-read gauge.

The aero-shaped barrel and wide steel base provide stability when pumping and the 3” top mounted gauge is easy to read up to 200 psi (14 bar). The large padded handle provides comfort while the extra-long and tangle-free hose can even reach wheels on bikes mounted in a stand. The SmartHead DX3 with lower-profile air-release button automatically adjusts to fit either Presta or Schrader valves and makes getting the right pressure a simple task.

The Topeak JoeBlow III continues the tradition of setting the benchmark for floor pump durability and performance while ushering in upgrades with an enlarged 3-inch chronograph-inspired gauge and hammer-style TwinHead DX pump head. A durable steel barrel and base as well as an ergonomic padded handle make inflating tires a breeze. - Presta / Schrader / Dunlop-compatible - Max 160psi / 11bar - Volume per stroke: 317.5cc - 3.7lbs / 1.68kg - Ball and bladder needles included

Topeak's Joe Blow Sprint quickly inflates tires thanks to its durable aluminum barrel, a sturdy steel base, a tight-sealing aluminum thumblock head that fits Presta and Schrader valves and an oversized, padded handle. And, the easy-to-read, top-mounted gauge lets you dial in the perfect pressure every time!

This clever dual-gauge floor pump was exclusively designed for low pressure Fat-Bike tires and moderate pressure MTB tires. A massive oversized barrel is 1.5 times larger than a standard floor pump and delivers large air volume to fill oversized tires quickly. A 30 psi (2 bar) gauge shows precise low pressure for Fat-Bike tires while the 75 psi (5 bar) gauge shows higher pressures for MTB tires. An air release button on the TwinHead™ allows for fine-tuning pressure.

This pump is equipped with a hardened steel base, solid steel barrel, and an easy to read top mounted analog gauge. An extra long hose with a TwinHead pump head makes it easy to reach valve stems and the integrated mini tool carrier keeps what you need for light maintenance close at hand.

An easy-to-read top-mounted digital gauge with rubber bumper impact protection delivers accurate tire pressure readings up to 200psi / 14bar. The large padded handle provides comfort while the wide steel base keeps everything stable. The extra-long hose can even reach bikes mounted in a work stand. The SmartHead DX3 automatically adjusts to fit Presta or Schrader valves and a new lower-profile air-release button allows fine tuning of tire pressure while preventing unintended pressure release. - Head: SmartHead DX3 w/ air release button & extra-long hose - Barrel: Painted steel - Gauge: 200 psi / 14 bar, Top mounted digital (Tolerance : < 100 psi ± 1 psi / > 100 psi ± 1%) - Unit: psi, bar, kg / cm² - Battery: CR2032 x 1 (included) - Volume Per Stroke: 337cc - Handle: Oversize padded / Dual density polymer - Base: Hardened steel - Cushioned rubber for digital gauge protection, auto off, Dunlop valve adapter, Presta valve adapter, Ball / bladder heads, Hose dock - Size: 73.5 x 25.5 x 16.4cm / 28.9" x 10" x 6.5" - Weight: 1.97kg / 4.34lb

The JoeBlow Sport with unique 2-stage design delivers both high pressure and high volume in record time. Stage one opens both barrels for huge volume, reaching 30 psi with 30% less effort than standard floor pumps. Stage two utilizes the small barrel for pressures up to 160 psi. Hammer type TwinHead DX5 pump head with an extra-long and tangle-free hose makes it easy to reach valve stems. A durable steel barrel and large steel base provide extra stability. - Head: Hammer type TwinHead DX5, Presta / Schrader / Dunlop valves with extra-long 360 pivot hose - Barrel: Painted steel / anodized aluminum - Gauge: 160 psi / 11 bar, 3" mid mount analog Stage 1 : 0 - 30 psi Stage 2 : 30 - 160 psi - Volume Per Stroke: 715cc (Stage 1), 258cc (Stage 2) - Handle: Oversize / Dual density polymer - Base: Hardened steel - Ball / bladder heads, Hose dock - Size: 74 x 26.6 x 18cm / 29.1" x 10.5" x 4.6" - Weight: 2.5kg / 5.51lb

An easy-to-read mid-mounted digital gauge delivers accurate tire pressure readings up to 160psi / 11bar. Hammer type TwinHead DX5 pump head with an extra-long, tangle-free hose makes it easy to reach valve stems. A durable steel barrel and large steel base with ergonomic padded handle make it easy to get your ride up to pressure fast. - Head: Hammer type TwinHead DX5, Presta / Schrader / Dunlop valves with extra-long 360 pivot hose - Barrel: Painted steel - Gauge: 160 psi / 11 bar, Mid mounted flip-down digital (Tolerance: < 100psi ± 1 psi / > 100psi ± 1%) - Unit: psi, bar, kg / cm² - Battery: CR2032 x 1 (included) - Volume Per Stroke: 318cc - Handle: Oversize padded / Dual density polymer - Base: Hardened steel - Cushion rubber for digital gauge protection, auto off, Ball / bladder heads, hose dock - Size: 68 x 25.4 x 18cm / 26.7" x 10" x 4.6" - Weight: 1.8kg / 3.97lb

Topeak's Micro Rocket AL is a small pump that packs a punch. Small in stature, this 6.3-inch pump is a giant in tire inflation. It utilizes a compact, single-action design to blast tires up to 160 psi.

Topeak's Mini Dual is constructed of lightweight aluminum and sports a grippy Kraton and plastic handle for easy pumping. And, the thumb-lock head ensures an airtight seal on both Presta and Schrader valves.

Topeak's Mini Dual DXG is constructed of lightweight aluminum and sports a grippy Kraton and plastic handle for easy pumping. Topeak's thumb-lock SmartHead ensures an airtight seal on both Presta and Schrader valves and the built-in gauge lets you top off your tires with precision.

Topeak's Mini Morph is the perfect answer for riders who've had trouble deciding if they want a frame or floor pump. The Mini Morph is both! For maximum pumping power, it features a high-volume aluminum barrel, a fold-out base, a long hose and a T handle. A frame mount is included, too.

Big volume barrel while Dual-Action (DA) doubles volume with each stroke and inflates tires up to pressure fast. Integrated dust cap keeps pump head clean and thumb lock lever insures air-tight seal. Specs - HEAD: Presta / Schrader / Dunlop with integrated dust cap - BARREL: Aluminum - THUMB LOCK / HANDLE: Plastic - CAPACITY: 60 psi / 4 bar - VOLUME PER STROKE: 81.4 cc (pull + push) - SIZE: 22.3 x 4.6 x 3.4 cm / 8.8” x 1.8” x 1.3” - WEIGHT: 126 g / 4.44 oz Added Features - Dual-action pumping head - Side mount bracket

Larger barrel version pumps more air volume for MTB riders. Large integrated 1-1/8" diameter easy-to-read analog gauge provides the perfect inflation every time. Dual-Action (DA) doubles volume with each stroke and inflates tires up to pressure fast. Integrated dust cap keeps pump head clean and thumb lock lever ensures an air-tight seal. - Head: Presta / Schrader / Dunlop with integrated dust cap - Barrel: Aluminum - Thumb Lock/Handle: Polymer - Capacity: 60psi / 4bar, 1-1/8” Analog - Volume Per Stroke: 82 cc (pull + push) - Side mount bracket secures to water bottle bolts - Size: 25.3 x 4.6 x 3.4cm / 10” x 1.8” x 1.3” - Weight: 152g / 5.36oz