Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Parts & Accessories

$20.00 - $22.00
Front end cap conversion kits for NoTubes Neo and Neo Ultimate
- SealLock end caps feature a low friction U-cup seal that snaps into place

$13.50 - $25.00
Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims.
21mm width fits:
- ZTR Olympic
- ZTR Iron Cross
- ZTR 355
- ZTR Alpine
- ZTR Crest
- ZTR Alpha 340 (2 layers)
- ZTR Alpha 400 (2 layers)
- Most road clincher rims
25mm width fits:
- ZTR 355 (26", 650b, 29")
- ZTR Crest
- Crest MK3
- ZTR Arch EX
- ZTR Flow EX
- Crest S1
27mm width fits:
- ZTR Flow EX
- ZTR Bravo
- ZTR Hugo 52mm
- Arch S1
- ZTR Rapid 28
- ZTR Rapid 30
- Arch MK3
30mm width fits:
- ZTR Flow MK3

$16.00
Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant.
Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads:
- MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi
- ERD 615, 622x49.9, 29 in x 52.3mm
Your rim has a stepped valve and is not compatible with this Schrader valve.

$16.00
Compatible with straight valve hole Hugo 52 rims and designed to fit 7.5 - 8.5mm valve holes. Sold as a pair.
Identifying your Hugo rim and selecting the correct valve stem:
Stepped Hugo rims have a larger diameter valve hole on the interior of the rim, and a narrower hole on outside of the rim.
Quick tip: don't remove your tire if you don't have to. If your Hugo rim decal reads:
MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi
ERD 615, 622x49.9, 29 in x 52.3mm
Your rim has a stepped valve and is not compatible with this valve. For "Stepped" valve hole Hugo use part AS0105 - Valve Stem pair, Schrader, 32mm, 14mm base.

$9.99 - $139.99
Looking for a super lightweight but badass tubeless sealant? Boom, you've just found it my friend! No Puncture Hassle performs under the most brutal race conditions. The cutting-edge microfiber molecules fill the bigger holes and tears, whilst the advanced latex forms a strong seal instantly. The formula also contains a unique UV detection system that highlights any punctures you haven’t seen during your ride.
Developed with the world's top downhillers and pro peloton teams, to give you the finest tire sealant available. It's non-corrosive and easily washes off with water. Compatible with tubeless ready and full UST wheels/tires, No Puncture Hassle works from 15psi-120psi and temperatures from -20°C to +50°C. Our pouch is designed to fit your Presta valve perfectly and is ideal to add to your toolkit or ride pack for emergency top ups on the go!
- For Downhill, Enduro and Road tires
- Seals tears and holes up to 6mm
- Contains UV puncture detection
- Won't dry out or ball
- Works from 15psi-120psi and temperatures from -20°C to +50°C
- Biodegradable

$11.99 - $15.99
The Muc-Off Tubeless Rim tape is made from their proprietary performance material with a pressure-sensitive adhesive to provide just the right amount stretch whilst maintaining durability and strength needed to create a lasting airtight seal. Semi-transparent material makes locating the valve hole easy.

$65.99
The Muc-Off Ultimate Tubeless Kit contains everything needed to get a tubeless-ready wheelset set up and ready to roll. Each Kit contains Tubeless Rim Tape, two CNC-machined black tubeless valves and two pouches of No Puncture Hassle Tubeless Sealant.

$21.00
These lightweight valves help prevent clogging from tubeless sealant.
- Aluminum
- 40mm length

$995.00
The most capable wheels in i9 history have worn the Enduro name and the Enduro S does the pedigree proud. Enduro S is handbuilt for the long haul with 28 straight-pull spokes, the same proven rim profile as the EN305, and our finely crafted Hydra-equipped hubs. Born from an impressive bloodline, Enduro S is well situated to elevate your riding with features you won’t have to sell your first born for. 6 Bolt Only.
FEATURES
6 Pawl HYDRA Freehub Body
Our groundbreaking 690 P.O.E. Hydra Freehub body engages every .52 degrees yeilding telepathic control.
S-Series
"S" is for steel, in this case the spokes. A high performance 28h hub and straight-pull spoke system, but in a more conventional, approachable and economical package.
Micro Spline
Shimano 11 + 12spd compatible.
Super Boost Available
Available for the latest frames employing Super Boost 157mm spacing.
2-Year Warranty
Warranty coverage against defects on your Industry Nine wheelset or Classic hubset.

$6.18 - $9.79
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity

$24.50
DT Swiss tubeless ready tape seals the rim for tubeless applications and also works well as rim tape for tube-type set ups.
- Highly resistant adhesive tape works as a rim tape and airseal

$70.00
- Wheel bearing kit front/rear
- Bearing dimensions: 17 x 30 x 7mm
- Material: steel
- 2 pieces

$19.00 - $31.00
Wheel Conversion Caps for Zipp 77/177 Disc hubs. Converts your Zipp 77 or 177 hubs to nearly any frame standard.

$7.00
Package comes with two pieces of rim tape for use with the Zipp clinchers. Woven nylon material. Tape is extra thin with a thickness of 0.5 mm.
Note: For Zipp 700c and 650c aluminum/carbon hybrid clichers, use the 16 mm rim tape. For Zipp 30 wheel set use 18mm but for the wider Firecrest and Firestrike carbon clinchers use the 20mm x 1/2mm rim tape.

$21.00
These die-cut borderless decals provide a distinctive look to go with the distinctive sound and aero-advantage of Zipp wheels rolling at 45km an hour. Zipp’s Matte white and Matte black decals also are still available. Each decal kit has seven decals sufficient to cover one wheel and two matching valve-hole decals.
Note: Before applying the decals, make sure the rim surface is free of dirt and debris. We recommend a gentle wipe with acetone or rubbing alcohol. Peel the white backing sheet from the decal, orientate, position and gently press the decal onto the rim surface. Starting at one end, remove the surface clear cover slip and then work the decal into the dimples using a 3M squeegee.

$108.00
Wheel Freehub Kit—(Includes Bearings & Pawls) 11/12 Speed XD—X0 HUBS/RISE 60 (B1)/ROAM 30/ROAM 40/RAIL 40/RISE XX/ROAM 50/60 (B1)
Compatible With:
HU-X0-A1, WH-RAIL-40-A1, WH-RISE-60-B1, WH-RISE-XX-A1, WH-ROAM-30-A1, WH-ROAM-40-A1, WH-ROAM-50-A1, WH-ROAM-50-B1, WH-ROAM-60-B1

$98.00
Match your Beyond Black hubs, spokes and decals (each sold separately) with skewers from Zipp.
- Sold in pairs
- Stainless steel: 85 grams/set
- Titanium: 78 grams/set

$9.95
The Wolf Tooth Rear Axle uses a captive steel washer under the head to reduce friction on the dropout face. This protects your expensive frame, transfers more of the tightening torque to clamping load for a stiffer interface and prevents the axle from sticking or galling when you want to remove it.
- Made in Minnesota to aerospace standards

$39.95
The Wolf Tooth axle uses a captive steel washer under the head to reduce friction on the fork leg. This protects your expensive fork, transfers more of the tightening torque to clamping load for a stiffer interface and prevents the axle from sticking or galling when you want to remove it. These are also a great replacement option for lost or damaged stock axles. Always apply a small amount of grease to the washer and threads when installing.
- Designed and manufactured in Minneapolis, MN USA
7075 T6 Aluminum

$44.95
The Wolf Tooth axle uses a captive steel washer under the head to reduce friction on the fork leg. This protects your expensive fork, transfers more of the tightening torque to clamping load for a stiffer interface and prevents the axle from sticking or galling when you want to remove it. These are also a great replacement option for lost or damaged stock axles. Always apply a small amount of grease to the washer and threads when installing.
- Designed and manufactured in Minneapolis, MN USA
- 7075 T6 Aluminum
Page 1 of 9
Next page